Job Ready Program (JRP) – TRA guide for trade graduates
Who the Job Ready Program is for
JRP is an employment-based skills assessment. It confirms that you can do your trade in a real Australian workplace – follow complex instructions, work unsupervised to Australian industry standards, work safely, choose and use the right tools, and show the employability skills expected in your industry.
| Who can apply | International student graduates of an Australian VET course from a CRICOS-registered RTO, who are working in Australia in their nominated occupation |
|---|---|
| First step | A successful Provisional Skills Assessment (PSA) from TRA in the same occupation, issued within the last 3 years |
| Minimum length | 12 months full-time (average 38 hours a week) or the part-time equivalent |
| Time limit | The 12 months must be completed within 3 years of your Program Start Date |
| Where | All JRP employment must be in Australia |
| Not eligible | Electrician (General and Special Class), Plumber (General), and Air-conditioning and Refrigeration Mechanic |
The JRP steps, fees and processing times
| Step | What happens | TRA fee | TRA guide time |
|---|---|---|---|
| 0. Provisional Skills Assessment (PSA) | TRA checks your Australian qualification against your nominated occupation. Used for the 485 visa (Post-Vocational Education Work stream) and to enter JRP. Valid 3 years. | $130 | About 12 weeks |
| 1. Job Ready Employment (JRE) | You register your employer. TRA checks eligibility, your job and any Prior Employment claim. The date you submit is your Program Start Date. At 6 months full-time (or equivalent) you submit a Skills Progress Report and a 6-month Employment Confirmation Form. | $490 | Registration up to 30 days; TRA aims to contact you within 2.5 months |
| 2. Job Ready Workplace Assessment (JRWA) | After an invitation, a TRA-approved RTO assessor interviews you and observes your work at your current employer’s workplace. | $2,845 (each attempt) | Invitation usually within 8 months of Start Date; completion up to 15 weeks |
| 3. Job Ready Final Assessment (JRFA) | After an invitation, you upload a 12-month Employment Confirmation Form, your passport page and pay evidence covering 12 months. TRA issues your Skills Assessment Outcome letter. | $75 | Outcome within 14 days of application |
Total TRA fees for the three JRP steps: $3,410 (more if you need another workplace assessment). Fees can change – check the TRA website before you pay. Processing times are a guide only.
Employment rules you must meet
- Full-time means an average of 38 hours a week over at least 12 months, including up to 4 weeks of paid leave. More leave extends the program – for example, 5 weeks of paid leave adds 1 week.
- Part-time or casual work is counted pro rata. TRA’s example: an average of 30 hours a week takes just over 14 months.
- Paid employment only – you need payslips or other acceptable pay evidence. Every Australian employer must give payslips, and you should be paid the correct award wage.
- Up to 5 employers in total, and at least 6 months full-time (or equivalent) with one employer. Each employer must be registered with a signed Employment Verification Report (EVR) and 3 weeks of pay evidence; a new employer only counts from the date it is registered.
- Subcontractors may be considered if you can complete at least 6 months full-time equivalent with a single contractor who will sign your EVR and Skills Progress Report.
- Prior Employment – you can claim up to 3 months of unbroken paid work done immediately before your JRE application, with your current employer, if it was not used for your PSA. You can only claim it when you apply.
- Keep working until you receive your final outcome letter. The program cannot be finished in less than 12 calendar months.
- Your visa is your responsibility – TRA does not give visa advice. Make sure your visa lets you work in the job and lasts long enough to finish the program.
Tell TRA about changes on time
| Within 14 days | Contact details, name, address or passport; average working hours; your authorised representative (for example your migration agent); extended leave; anything else that may affect your ability to finish |
|---|---|
| Within 28 days | A change of employer or a change in your role |
Use TRA’s Change of Details Form. Late notice can delay your progress.
The workplace assessment
The RTO assessor checks that you understand your job, can handle routine and complex tasks, are reliable and responsible, and work safely and efficiently to industry standards. They use your Skills Progress Reports, so these must accurately describe the work you actually do.
- A Not Yet Job Ready result can happen because of limited job knowledge, frequent errors, work not meeting industry standards, or difficulty working safely or communicating.
- You can ask TRA for a review within 28 days of the outcome, or apply for another workplace assessment (new Skills Progress Report and confirmation form, another $2,845 fee). After a second unsuccessful attempt, TRA may ask for extra eligibility, such as 3 more months of employment evidence.
- If your employer closes, the workplace assessment cannot go ahead there – a new employer must be approved first, with at least one month of employment evidence.
What your employer must do
- Give you the right environment, tools and equipment to build and show your skills
- Sign your Employment Verification Report and confirm your Skills Progress Reports
- Accept that TRA may contact them to verify your employment, and that an RTO assessor (and possibly a TRA officer) may visit the workplace
Employers keep normal control of your employment. TRA cannot help you find an employer.
JRP occupations and the Australian qualification for each
These are the occupations with a published JRP Employment Verification Report on the TRA website, with the current Australian qualification TRA lists for each one. TRA says other or older qualifications may be accepted if they are relevant – it compares your transcripts and course content with the occupation. If your occupation is not listed, TRA asks you to email it for an EVR.
| Occupation | ANZSCO | Australian qualification (TRA list) |
|---|---|---|
| Airconditioning and Mechanical Services Plumber | 334112 | Certificate III in Plumbing (Mechanical Services) |
| Automotive Electrician | 321111 | Certificate III in Automotive Electrical Technology |
| Baker | 351111 | Certificate III in Baking |
| Boat Builder and Repairer | 399111 | Certificate III in Boating Services |
| Bricklayer | 331111 | Certificate III in Bricklaying and Blocklaying |
| Cabinetmaker | 394111 | Certificate III in Cabinet Making and Timber Technology |
| Cabler (Data and Telecommunications) | 342411 | Certificate III in Data and Voice Communications Certificate III in Telecommunications Technology Certificate III in Telecommunications Network Build and Operation |
| Carpenter and Joiner | 331211 | Certificate III in Carpentry |
| Carpenter | 331212 | Certificate III in Carpentry |
| Chef | 351311 | Certificate IV in Kitchen Management Certificate IV in Commercial Cookery Certificate IV in Asian Cookery Certificate IV in Patisserie |
| Cook | 351411 | Certificate III in Asian Cookery Certificate III in Catering Operations Certificate III in Commercial Cookery Certificate IV in Kitchen Management |
| Dental Technician | 411213 | Diploma of Dental Technology |
| Diesel Motor Mechanic | 321212 | Certificate III in Heavy Commercial Vehicle Mechanical Technology Certificate III in Mobile Plant Technology |
| Electrical Engineering Technician | 312312 | Advanced Diploma of Electrical – Engineering |
| Electronic Equipment Trades Worker | 342313 | Certificate III in Electronics and Communications |
| Electronic Instrument Trades Worker (General) | 342314 | Certificate III in Instrumentation and Control |
| Electronic Instrument Trades Worker (Special Class) | 342315 | Certificate IV in Instrumentation and Control |
| Fibrous Plasterer | 333211 | Certificate III in Wall and Ceiling Lining |
| Fitter (General) | 323211 | Certificate III in Engineering – Mechanical Trade (Fitter) |
| Fitter and Turner | 323212 | Certificate III in Engineering – Mechanical Trade (Fitting/Machining) |
| Fitter-Welder | 323213 | Certificate III in Engineering – Mechanical Trade |
| Gardener (General) | 362211 | Certificate III in Horticulture |
| Glazier | 333111 | Certificate III in Glass and Glazing |
| Hairdresser | 391111 | Certificate III in Hairdressing |
| Hardware Technician | 313111 | Certificate III in Computer Systems Equipment |
| ICT Customer Support Officer | 313112 | Certificate IV in Information Technology |
| ICT Support Technician NEC | 313199 | Certificate IV in Information Technology |
| Joiner | 331213 | Certificate III in Joinery |
| Landscape Gardener | 362213 | Certificate III in Landscape Construction |
| Locksmith | 323313 | Certificate III in Locksmithing |
| Mechanical Engineering Technician | 312512 | Certificate IV in Engineering |
| Metal Fabricator | 322311 | Certificate III in Engineering – Fabrication Trade |
| Metal Machinist (First Class) | 323214 | Certificate III in Engineering – Mechanical Trade (Machining) |
| Motor Mechanic (General) | 321211 | Certificate III in Light Vehicle Mechanical Technology |
| Motorcycle Mechanic | 321213 | Certificate III in Motorcycle Mechanical Technology |
| Nurseryperson | 362411 | Certificate III in Nursery Operations |
| Painting Trades Worker | 332211 | Certificate III in Painting and Decorating |
| Panel Beater | 324111 | Certificate III in Automotive Body Repair Technology |
| Pastrycook | 351112 | Certificate III in Patisserie |
| Radiocommunications Technician | 313211 | Certificate IV in Telecommunications Engineering Technology |
| Sheetmetal Trades Worker | 322211 | Certificate III in Engineering – Fabrication Trade (Sheetmetal Working) |
| Shipwright | 399112 | Certificate III in Marine Craft Construction |
| Solid Plasterer (Renderer) | 333212 | Certificate III in Solid Plastering |
| Stonemason | 331112 | Certificate III in Stonemasonry |
| Telecommunications Lineworker | 342413 | Certificate III in Telecommunications Network Build and Operation |
| Wall and Floor Tiler | 333411 | Certificate III in Wall and Floor Tiling |
| Welder (First Class) | 322313 | Certificate III in Engineering – Fabrication Trade (Welding) |
Being on this list does not mean your occupation is on a skilled visa occupation list. Check visa options with our occupation finder.
Common mistakes we see
- Applying for a workplace or final assessment before TRA invites you
- Pay evidence that does not match your hours, or cash work that TRA cannot verify
- Changing employer, hours or role without telling TRA in time
- Skills Progress Reports that do not describe the real work you do
- Using an old version of the EVR or SPR form
- Letting your visa run out before you finish the program
After you finish
Your Skills Assessment Outcome letter can be used to apply to the Department of Home Affairs for a skilled visa. It is not a qualification or a licence. Your next steps usually include checking your occupation is on the right list, working out your points, and lodging an Expression of Interest for a 189, 190 or 491 visa, or exploring employer sponsorship.
Frequently asked questions
How long does the Job Ready Program take?
At least 12 months of full-time employment (average 38 hours a week) from your Program Start Date, or longer if you work part-time or take extra leave. It must be finished within 3 years of starting.
How much does JRP cost?
TRA fees are $490 for Job Ready Employment, $2,845 for the Workplace Assessment and $75 for the Final Assessment – $3,410 in total, plus $130 for the Provisional Skills Assessment. Another workplace assessment costs another $2,845.
Can electricians or plumbers do JRP?
No. Electrician (General and Special Class), Plumber (General) and Air-conditioning and Refrigeration Mechanic are licensed occupations that are not eligible for the Job Ready Program.
Can I count work I did before applying?
Yes, up to 3 months of unbroken paid work immediately before your Job Ready Employment application, with your current employer, if it was not used for your Provisional Skills Assessment. You must claim it when you apply.
Can I change employers during JRP?
Yes, up to 5 employers in total, but you need at least 6 months full-time equivalent with one employer and must tell TRA within 28 days. A new employer only counts from the date it is registered.
Can a migration agent help with JRP?
Yes. You can authorise a migration agent with TRA’s Agent Nomination Form. TRA still contacts you directly, so keep your own email and phone details up to date.
Need help with your Job Ready Program or skilled visa?
Talk to a registered migration agent. We work 100% online across Australia and overseas, are available on weekends, and are based in Point Cook, Melbourne.
Book a consultationOfficial sources: TRA – Job Ready Program · JRP Guidelines · JRP FAQs · Provisional Skills Assessment · Australian Qualifications by Occupation · Employment Verification Reports
Related: TRA skills assessments · Skills assessment checker · Occupation finder · Our fees
Important – please read: This page is general information only, not migration or legal advice. It is based on the TRA Job Ready Program Guidelines (version 37.0, April 2026), the TRA JRP FAQs and the TRA Australian Qualifications by Occupation list (3 December 2025) as last reviewed on 15 November 2026. Rules, fees and processing change often and this page may be out of date. Do not rely on it for accuracy – check the official sources and get advice about your own situation before you act. Blue Sea Migration – Deepak Singla, Registered Migration Agent, MARN 2518833.
